ĐUI ĐÈN CẢM ỨNG ÁNH SÁNG LSE27-TIME LÀ GÌ?

CHỨC NĂNG CÁC NÚT CHỈNH ĐUI ĐÈN CẢM BIẾN LSE27-TIME

• If you adjust the direction of the rotating arrow to "AUTO", the light sensor will automatically turn on the light when it is dark (<10 Lux) and will automatically turn off the light when it is bright (>20 Lux).
• If you adjust the direction of the rotating arrow to position 1:00, 2:00, 4:00, 8:00 or 12:00, the auto-off time will correspond to the selected time interval. No longer depends on the Lux level threshold (> 20 LUX).

ĐUI ĐÈN CẢM ỨNG ÁNH SÁNG NÀY THƯỜNG ỨNG DỤNG Ở ĐÂU?

• Lights installed in the garden, gate pillar lights for outdoor areas: (Note that they need a hood to protect against direct water splashes)

• Village street lights, private paths...

BENEFITS OF LIGHT SENSOR LAMP HOLDERS

• Lights turn on automatically when it's dark, avoid leaving the house dark when you go somewhere and can't return in time or when you're away from home. Thieves have to be careful because there may be someone in the house.
• The light turns off automatically late at night or in the morning, avoiding forgetting to turn off the light and wasting electricity
• No hassle or discomfort because you don't have to remind someone to turn the lights on and off every day.
• Helps the electrical system to turn on/off appropriately depending on the light and dark of the environment, unlike a timer switch, when it is not yet dark and the lights are turned on...
• Maximize the ability to save electricity in using public and home lighting...
• Turn off promptly when it's light, overcome the problem of using a timer switch because in the winter it gets dark early and during the season it gets dark late...

WHAT ARE THE DIFFERENT CHARACTERISTICS OF KAWASAN TOUCH LIGHT HOLDERS COMPARED TO OTHER PRODUCTS ON THE MARKET?

• Currently on the market, there are mainly induction lamp holders, using the infrared sensor principle. Only turns on the light when someone moves near, not the light sensor.
• KAWASAN light sensor lamp holder, present on the Vietnamese market from 2008 to present. Invested in research to improve quality and technical features to meet Vietnam's environmental conditions and usage habits.
• The quality of the touch lamp holder is at the top of the market in terms of durability and high sensitivity. Operates according to real light environmental conditions, helping to be proactive and convenient when it's dark.
• Compact, beautiful design increases the aesthetics of the installation space.
• There is an arrow direction adjustment button that rotates to the 1h, 2h, 4h, 8h or 12h position, then the countdown timer mode turns off automatically. Now it is no longer dependent on the lux level threshold to turn off (>20 LUX)

• Operating voltage: 110-240VAC/50-60Hz
• Active Lux level: On (<10 Lux), Off (>20Lux)
• Set auto-off time: 1h, 2h, 4h, 8h, 12h
• Operating temperature: -10+60°C
• No-load power consumption: <0.2W
• E27 twisted tail light output power: 100W (compact), 30W (Led)

HOW TO INSTALL CEILING OR WALL MOUNTING:

ATTENTION:

• Turn off the power before installing the device
• Install the E27 twisted lamp holder into the ceiling or wall then attach the device
• Do not install the device in damp places or places with direct light from other lights

 CHECKING DEVICES:

• Check assuming it's dark: Adjust the arrow direction to "AUTO" then use a dry cloth or black plastic to cover the light sensor and after 15 - 30 seconds the light will turn on.
• Check the assumption when it's bright: Put the sensor in a location with outdoor light or use a flashlight, light... to shine on the sensor's eye, wait 3 to 10 minutes, the light senses the brightness and will turn off. .
• Note: In some cases, the brightness is not enough and the light may not turn off. At this time, just adjust the Time button to the time you need to set the timer to turn off the light and install it, monitor the set time the light will turn off (Time). The time may vary by 15 to 30 minutes compared to the actual time, it needs to be re-calibrated to be closer to the desired time).

SOME COMMON PROBLEMS AND HOW TO FIX:

The lamp does not work:

• Check if there is power to the device socket
• Check to see if the light bulb has any problems
• Check whether the Lux level at the installation site has dropped to the threshold for turning on the light?

Light comes on then turns off (no second touch)

• Check whether the adjustment button is AUTO or timer. If in timer mode, you must activate the light source to the sensor for 1 to 10 minutes or turn off the power and then turn it back on.

Flashing light - turns off continuously:

• Check whether the light from the light bulb on the lamp holder is reflected back to the optical sensor?

Thank you for trusting Kawasan products!

Toll-Free Consulting Hotline: 1800 0058 Or Call Directly: 0911 757 234

Website: www.kawasan.com.vn