HIGHLIGHTS CEILING LIGHT SENSOR LIGHT

Light sensor lamp LS329P, works based on the principle of sensing the brightness (Lux level) of the surrounding environment. Automatically turn on the light when the brightness is low <20 lux (about 6pm in the summer). The light will turn off automatically when the environment is bright enough >20 lux (equivalent to 6am in the summer). Ceiling/wall floating design, easy to install in locations such as gateways, hallways, balconies...

HOW IS A LIGHT SENSOR LIGHT DIFFERENT FROM A MOTION SENSOR LIGHT WITH A LIGHT SENSOR?

• Light sensor lamp, only turns on when it's dark and turns off when it's light. Motion sensor lights usually use infrared sensors or microwave sensors and have an additional light sensing function.
• Most motion sensor lights often have an additional light sensor. To identify dark environments, the motion sensor begins to work. At this time, the light sensor only plays the role of detecting brightness. After switching to the motion sensor function, the light sensor is no longer effective. Unless the motion sensor bulb has to turn off, and repeat the cycle again. At this time, the light sensor begins to detect light again from the beginning.
• Lighting capacity of 16W, standard light does not dazzle users. Watertight index IP66 good waterproof, can be installed indoors or outdoors.

BENEFITS OF LIGHT SENSOR CEILING LIGHTS

• The ceiling sensor light turns on automatically when it gets dark, avoiding leaving the house dark when you go somewhere and can't get home in time or when you're away from home. Thieves must be careful because there may be someone in the house.
• No hassle or discomfort because you don't have to remind someone to turn the lights on and off every day.
• Helps the electrical system to turn on/off appropriately depending on the light and dark of the environment, unlike a timer switch, when it is not yet dark and the lights are turned on...
• Maximize the ability to save electricity in using public and home lighting...
• Turn off promptly when it's light, overcome the problem of using a timer switch because in the winter it gets dark early and during the season it gets dark late...

SOME POSITIONS SHOULD INSTALLED CEILING SENSOR LIGHTS LS329P

Suitable for installation in hallway lights, balconies, gates, gardens, factories...

• Operating voltage: 220-240VAC/50-60Hz
•  Degree Lux Activate the light: <20 Lux
•  Operating temperature: -10+80°C
•  LED power: 16W
•  Installation height: 2-4m (ceiling mounted), 1.5-3.5m (wall mounted).
• Water tightness: IPP6
• Dimensions: 300×87 mm

How to wire the device.

How to fix the device to the ceiling or wall.

ATTENTION:

• Turn off the power before installing the device.
• Teminal N and L Power supply to 220V, Teminal L is the wire "hot".
• The optical sensor eye is fixed in a position to receive good sunlight in the morning and afternoon.
• Do not install the device in damp places or places with direct light from lights.

SOME COMMON PROBLEMS AND HOW TO FIX:

The lamp does not work

• Check if there is power to the Tempinal power source?
• Check to see if the cable or LED ring has any problems?
•  Check whether the Lux level at the installation site has dropped to the threshold for turning on the light?

Light flashes and turns off continuously:

• Check if the light from the bulb reflects back to the optical sensor

Thank you for trusting Kawasan products!

Technical consulting phone number: 1800.0058 (toll free) or call directly: 0911 757 234

Website: www.kawasan.com.vn