













SB60M Solar Wireless Beam Detector
Sold: 1453 sản phẩm
4.200.000 ₫ 3.780.000 ₫ (VAT included)
- Power supply from solar panel: 1800 Lux >0.2mA
- COM and NC relay contact output, max AC/DC current 0.5A
- Wireless Frequency: RF433MHz
- Transmitter Battery Capacity: 500mAh; Receiver Battery Capacity: 1000mAh
- Operating Temperature: -25°C to +65°C
- Tamper-Proof Relay Output Function: AC/DC 30V, 0.5A max
- Transmit / Receive Range Between 2 Beam Units: <60m
- Max Trigger Times: ≤50 times within 24 hours
- Operating Time: 15–20 rainy days
- NO Output for adding auxiliary siren or light, with separate power supply required
COMPARISON OF BEAM DETECTORS CURRENTLY IN USE
1/ Conventional beam detectors (wired connection):
This type of beam detector requires a signal cable from the beam detector to the control unit or alarm siren. Wiring must therefore be run from the gate, where the beam detector is installed, back to the control unit. This often presents the following technical issues and disadvantages: a) The two beam units (receiver and transmitter) must be connected to each other by electrical wiring. b) The beam receiver must be connected to the siren or control unit by a signal cable. c) The wiring may become damaged or break after a period of use. d) The cost of wiring, accessories, and labor to connect the two beam units and run a cable from the beam detector to the control unit is often very high, depending on the length of the fence and the distance from the fence to the control unit. e) An additional 220V-to-12V adapter is needed to supply 12V-2A power to the two beam units. f) A thief may notice and cut the cable to the alarm control unit, disabling the alarm signal before entering to steal property.
2/ Wireless beam detectors (connected to the siren or alarm control unit via RF 433MHz):
This type of beam detector sends signals from the beam receiver to the control unit via RF, saving the cost and labor of running a cable from the fence to the control unit. However, users still need wiring to connect and power the two beam units (receiver and transmitter), so the following problems may occur: a) The two beam units must be connected by electrical wiring. b) The wiring may be damaged or break after a period of use. c) Wiring, accessories and labor are required to supply power to and connect the two beam units. d) A 220V-to-12V adapter is needed to supply 12V-2A power to the two beam units. e) An intruder may notice and cut the wiring connected to the alarm control unit to disable the alarm before entering to steal property.
3/ Solar-powered wireless beam detectors
This type of beam detector addresses most of the problems that may occur: a) No power or signal wires are needed between the two beam units. b) It connects to the control unit or alarm siren entirely wirelessly via RF. c) The solar panel charges a built-in battery that can provide backup power for 15–20 rainy days or days without sunshine. The solar panel can still charge the battery slowly when it is not sunny, helping maintain continuous operation. The initial price may seem high—2–3 times that of a conventional beam detector. However, once full installation costs are included, the total may be nearly the same or somewhat higher. Above all, the lack of connecting wires means an intruder cannot cut them to disable the intruder alarm before entering.
FEATURES OF THE SOLAR-POWERED WIRELESS BEAM DETECTOR
- Đầu Beam không dây năng lượng mặt trời SB60 dùng lắp đặt hàng rào chống trộm. Dùng điện 3.2V thông qua pin dự trữ từ tấm pin năng lượng mặt trời. Dung lượng pin dự trữ đầu thu 1000mAh, đầu nhận 500mAh.
- At up to 50 alarm activations per day, the beam detector operates continuously for 24 hours. Actual operating time is 3–7 days after the battery is fully charged.

- The infrared perimeter alarm projects two parallel beams. It can sound an alarm on-site or send an alert through a Kawasan control unit.
- SB60M dùng cho hàng rào khoảng cách từ 1m- 60m
WHY USE A SOLAR-POWERED WIRELESS ELECTRONIC PERIMETER ALARM?
Most homes, from rural areas to cities, have fences built around them for protection. Some have pointed iron spikes or pieces of broken glass along the top of the wall. Barbed wire is also common, especially around warehouses and factories. Many consider these methods effective. However, they affect the appearance of the property and may be dangerous if a household member accidentally touches them.

ADVANTAGES OF SOLAR-POWERED WIRELESS BEAM DETECTORS
- Protection against wire cutting: With no power or signal cable between the two beam units, an intruder cannot cut those connecting wires to disable the alarm before entering. The wireless design also avoids disruption to the intruder alarm system caused by cut electrical wires.
- Saves the cost of wiring materials and installation labor. Wiring and labor for a conventional beam alarm can be expensive—potentially more than the cost of investing in an SB60M/SB100M solar-powered wireless beam set.

- Solar energy does not add to the electricity bill and does not require frequent maintenance.
- Uses RF 433MHz to connect wirelessly to an alarm siren or control unit.
- The dual infrared beams have a transmitter-to-receiver distance of 0–60m or 60–100m. Four SB beam sets can cover the entire protected perimeter.
- The integrated lithium battery can provide power for 15–20 days, maintaining operation during several cloudy or rainy days.
- The perimeter detector has an IP65 rating for resistance to dust, rain and mist.
APPLICATIONS OF SOLAR-POWERED WIRELESS BEAM DETECTORS
The infrared perimeter alarm can be installed along fences and at gates. It can connect to an on-site siren or an alarm control unit. Suitable locations include:- Homes, villas, resorts, temples, hospitals and similar areas.
- Warehouses, factories, companies, stadiums and similar areas.

IS KAWASAN’S PERIMETER ALARM A GOOD CHOICE?
- Kawasan has 16 years of experience in security devices. Consumers have trusted the brand for many years.
- The product has a 2-year official warranty and a service life of >5 years, helping users save on replacement costs.
- When the highly sensitive dual infrared beams detect an intruder, the device can sound an alarm or send a signal to the alarm control unit. This helps protect people and property when the homeowner is away or when children and other family members are at home.
- The SB60-100M perimeter alarm helps reduce costs. Its solar-powered battery can operate for 5–7 rainy days, helping it continue protecting the installed area.
- Instructions are provided in Vietnamese for the convenience of Vietnamese users.

- Power supply from solar panel: 1800 Lux >0.2mA
- COM and NC relay contact output, max AC/DC current 0.5A
- Wireless Frequency: RF433MHz
- Transmitter Battery Capacity: 500mAh; Receiver Battery Capacity: 1000mAh
- Operating Temperature: -25°C to +65°C
- Tamper-Proof Relay Output Function: AC/DC 30V, 0.5A max
- Beam Type: Dual beam
- Transmit / Receive Range Between 2 Beam Units: <60m
- Wired Connection Distance to Control Center: SB60M / SB100M: 50–200m, depending on wireless, radio, Wi-Fi, magnetic interference and environment
- Sensor Response Speed: 100ms
- Power Supply: DC3.2V, lithium iron phosphate battery
- Charging Power: 2VDC, 500mAh receiver – 1000mAh transmitter
- Transmitter Static Current: ≤0.5mA; Receiver Static Current: ≤0.3mA
- Max Trigger Times: ≤50 times within 24 hours
- Operating Time: 15–20 rainy days
- NO Output for adding auxiliary siren or light, with separate power supply required


Thank you for trusting Kawasan products!
Toll-Free Consulting Hotline: 1800 0058 Or Call Directly: 0911 757 234
Website: www.kawasan.com.vn
- Description
- Reviews (2)
Description
COMPARISON OF BEAM DETECTORS CURRENTLY IN USE
Nội Dung Bài Viết
Toggle1/ Conventional beam detectors (wired connection):
Là loại đầu beam phải kết nối dây tín hiệu từ đầu Beam về bộ trung tâm hoặc còi báo động, lúc này phải kéo dây điện từ cổng, nơi lắp đầu Beam kết nối về trung tâm, thường gặp phải một số vấn đề kỹ thuật và bất lợi sau:
a) Hai đầu beam (gồm đầu thu và đầu phát) phải kết nối với nhau bằng dây điện.
b) Đầu Beam thu tín hiệu phải kết nối dây tín hiệu về còi hoặc bộ trung tâm.
c) Xử cố dây điện bị hỏng hoặc đứt sau một thời gian sử dụng.
d) Chi phí dây điện, phụ kiện và nhân công thường rất cao để kết nối giữa 2 đầu beam, từ đầu beam về trung tâm, tùy thuộc vào khoảng cách hàng rào và khoảng cách từ hàng rào về bộ trung tâm.
e) Phải tốn chi phí bộ nguồn Adaptor 220V – 12V để có nguồn điện 12V-2A cấp nguồn cho 2 đầu Beam
f) Kẻ trộm để ý và cắt dây kết nối về trung tâm báo động để vô hiệu hóa tín hiệu báo động nhằm mục đích đột nhập để trộm cắp tài sản.

2/ Wireless beam detectors (connected to the siren or alarm control unit via RF 433MHz):
Là loại đầu beam có thể kết nối từ đầu Beam thu về bộ trung tâm thông quá sóng RF. Tiết kiệm được chi phí và nhân công lắp dây điện từ hàng rào về bộ trung tâm. Tuy nhiên người dùng vẫn phải kết nối dây tín hiệu và cấp nguồn giữa 2 đầu báo beam (đầu thu và đầu phát), vẫn có thể xảy ra một số vấn đề sau:
a) Hai đầu beam (gồm đầu thu và đầu phát) phải kết nối với nhau bằng dây điện.
b) Xử cố dây điện bị hỏng hoặc đứt sau một thời gian sử dụng.
c) Tốn chi phí dây điện, phụ kiện và nhân công để đi dây điện để cấp nguồn và kết nối 2 đầu Beam.
d) Phải tốn chi phí bộ nguồn Adaptor 220V – 12V để có nguồn điện 12V-2A cấp nguồn cho 2 đầu Beam
e) Kẻ trộm để ý và cắt dây kết nối về trung tâm báo động để vô hiệu hóa tín hiệu báo động nhằm mục đích đột nhập để trộm cắp tài sản.

3/ Solar-powered wireless beam detectors
Là loại đầu beam hoàn hảo nhất, có thể khắc phục được hầu hết các vấn để và xử cố có thể xảy ra:
a) Không cần dây cấp nguồn nguồn và dây tín hiệu kết nối giữa 2 đầu beam
b) Kết nối với trung tâm hoặc còi báo động không dây hoàn toàn bằng sóng RF
c) Nguồn cấp từ năng lượng mặt trời, tự sạc vào Pin và có thể dự trữ đảm bảo cho người dùng trong suốt 15-20 ngày trời mưa hoặc không có nắng. Tuy nhiên Tấm Pin Năng Lượng Mặt Trời vẫn có thể sạc pin chậm, dù trời không nắng để đảm bảo duy trì liên tục không bị dán đoạn.
Chi phí ban đầu có vẻ rất cao, gấp 2-3 lần so với đầu báo beam thông thường. Tuy nhiên nếu tính chi phí lắp đặt hoàn thiện thì gần như ngang nhau hoặc có thể đắt hơn. Trên hơn hết là sự bảo mật tuyệt đối, kẻ gian không thể dây điện để vô hiệu hóa intruder alarm before entering.

FEATURES OF THE SOLAR-POWERED WIRELESS BEAM DETECTOR
- Đầu Beam không dây năng lượng mặt trời SB60 dùng lắp đặt hàng rào chống trộm. Dùng điện 3.2V thông qua pin dự trữ từ tấm pin năng lượng mặt trời. Dung lượng pin dự trữ đầu thu 1000mAh, đầu nhận 500mAh.
- At up to 50 alarm activations per day, the beam detector operates continuously for 24 hours. Actual operating time is 3–7 days after the battery is fully charged.

- The infrared perimeter alarm projects two parallel beams. It can sound an alarm on-site or send an alert through a Kawasan control unit.
- SB60M dùng cho hàng rào khoảng cách từ 1m- 60m
WHY USE A SOLAR-POWERED WIRELESS ELECTRONIC PERIMETER ALARM?
Most homes, from rural areas to cities, have fences built around them for protection. Some have pointed iron spikes or pieces of broken glass along the top of the wall. Barbed wire is also common, especially around warehouses and factories. Many consider these methods effective. However, they affect the appearance of the property and may be dangerous if a household member accidentally touches them.

This solution from Kawasanhelps users protect their homes while preserving their appearance. The SB60-100M solar-powered wireless beam detector can be mounted along the top of a wall, between fence posts and at other important points around the property. The electronic perimeter alarm works by projecting infrared beams that are invisible to the naked eye. When a person enters or obstructs the detection area, the sensor sends an alarm signal; it is designed to reduce false alarms caused by animals, birds or cats. This gives homeowners peace of mind when they are away or when the property is too large to monitor easily.

ADVANTAGES OF SOLAR-POWERED WIRELESS BEAM DETECTORS
- Protection against wire cutting: With no power or signal cable between the two beam units, an intruder cannot cut those connecting wires to disable the alarm before entering. The wireless design also avoids disruption to the intruder alarm system caused by cut electrical wires.
- Saves the cost of wiring materials and installation labor. Wiring and labor for a conventional beam alarm can be expensive—potentially more than the cost of investing in an SB60M/SB100M solar-powered wireless beam set.

- Solar energy does not add to the electricity bill and does not require frequent maintenance.
- Uses RF 433MHz to connect wirelessly to an alarm siren or control unit.
- The dual infrared beams have a transmitter-to-receiver distance of 0–60m or 60–100m. Four SB beam sets can cover the entire protected perimeter.
- The integrated lithium battery can provide power for 15–20 days, maintaining operation during several cloudy or rainy days.
- The perimeter detector has an IP65 rating for resistance to dust, rain and mist.
APPLICATIONS OF SOLAR-POWERED WIRELESS BEAM DETECTORS
The infrared perimeter alarm can be installed along fences and at gates. It can connect to an on-site siren or an alarm control unit. Suitable locations include:
- Homes, villas, resorts, temples, hospitals and similar areas.
- Warehouses, factories, companies, stadiums and similar areas.

IS KAWASAN’S PERIMETER ALARM A GOOD CHOICE?
- Kawasan has 16 years of experience in security devices. Consumers have trusted the brand for many years.
- The product has a 2-year official warranty and a service life of >5 years, helping users save on replacement costs.
- When the highly sensitive dual infrared beams detect an intruder, the device can sound an alarm or send a signal to the alarm control unit. This helps protect people and property when the homeowner is away or when children and other family members are at home.
- The SB60-100M perimeter alarm helps reduce costs. Its solar-powered battery can operate for 5–7 rainy days, helping it continue protecting the installed area.
- Instructions are provided in Vietnamese for the convenience of Vietnamese users.

- Description
- Reviews (2)
Description
COMPARISON OF BEAM DETECTORS CURRENTLY IN USE
Nội Dung Bài Viết
Toggle1/ Conventional beam detectors (wired connection):
Là loại đầu beam phải kết nối dây tín hiệu từ đầu Beam về bộ trung tâm hoặc còi báo động, lúc này phải kéo dây điện từ cổng, nơi lắp đầu Beam kết nối về trung tâm, thường gặp phải một số vấn đề kỹ thuật và bất lợi sau:
a) Hai đầu beam (gồm đầu thu và đầu phát) phải kết nối với nhau bằng dây điện.
b) Đầu Beam thu tín hiệu phải kết nối dây tín hiệu về còi hoặc bộ trung tâm.
c) Xử cố dây điện bị hỏng hoặc đứt sau một thời gian sử dụng.
d) Chi phí dây điện, phụ kiện và nhân công thường rất cao để kết nối giữa 2 đầu beam, từ đầu beam về trung tâm, tùy thuộc vào khoảng cách hàng rào và khoảng cách từ hàng rào về bộ trung tâm.
e) Phải tốn chi phí bộ nguồn Adaptor 220V – 12V để có nguồn điện 12V-2A cấp nguồn cho 2 đầu Beam
f) Kẻ trộm để ý và cắt dây kết nối về trung tâm báo động để vô hiệu hóa tín hiệu báo động nhằm mục đích đột nhập để trộm cắp tài sản.

2/ Wireless beam detectors (connected to the siren or alarm control unit via RF 433MHz):
Là loại đầu beam có thể kết nối từ đầu Beam thu về bộ trung tâm thông quá sóng RF. Tiết kiệm được chi phí và nhân công lắp dây điện từ hàng rào về bộ trung tâm. Tuy nhiên người dùng vẫn phải kết nối dây tín hiệu và cấp nguồn giữa 2 đầu báo beam (đầu thu và đầu phát), vẫn có thể xảy ra một số vấn đề sau:
a) Hai đầu beam (gồm đầu thu và đầu phát) phải kết nối với nhau bằng dây điện.
b) Xử cố dây điện bị hỏng hoặc đứt sau một thời gian sử dụng.
c) Tốn chi phí dây điện, phụ kiện và nhân công để đi dây điện để cấp nguồn và kết nối 2 đầu Beam.
d) Phải tốn chi phí bộ nguồn Adaptor 220V – 12V để có nguồn điện 12V-2A cấp nguồn cho 2 đầu Beam
e) Kẻ trộm để ý và cắt dây kết nối về trung tâm báo động để vô hiệu hóa tín hiệu báo động nhằm mục đích đột nhập để trộm cắp tài sản.

3/ Solar-powered wireless beam detectors
Là loại đầu beam hoàn hảo nhất, có thể khắc phục được hầu hết các vấn để và xử cố có thể xảy ra:
a) Không cần dây cấp nguồn nguồn và dây tín hiệu kết nối giữa 2 đầu beam
b) Kết nối với trung tâm hoặc còi báo động không dây hoàn toàn bằng sóng RF
c) Nguồn cấp từ năng lượng mặt trời, tự sạc vào Pin và có thể dự trữ đảm bảo cho người dùng trong suốt 15-20 ngày trời mưa hoặc không có nắng. Tuy nhiên Tấm Pin Năng Lượng Mặt Trời vẫn có thể sạc pin chậm, dù trời không nắng để đảm bảo duy trì liên tục không bị dán đoạn.
Chi phí ban đầu có vẻ rất cao, gấp 2-3 lần so với đầu báo beam thông thường. Tuy nhiên nếu tính chi phí lắp đặt hoàn thiện thì gần như ngang nhau hoặc có thể đắt hơn. Trên hơn hết là sự bảo mật tuyệt đối, kẻ gian không thể dây điện để vô hiệu hóa intruder alarm before entering.

FEATURES OF THE SOLAR-POWERED WIRELESS BEAM DETECTOR
- Đầu Beam không dây năng lượng mặt trời SB60 dùng lắp đặt hàng rào chống trộm. Dùng điện 3.2V thông qua pin dự trữ từ tấm pin năng lượng mặt trời. Dung lượng pin dự trữ đầu thu 1000mAh, đầu nhận 500mAh.
- At up to 50 alarm activations per day, the beam detector operates continuously for 24 hours. Actual operating time is 3–7 days after the battery is fully charged.

- The infrared perimeter alarm projects two parallel beams. It can sound an alarm on-site or send an alert through a Kawasan control unit.
- SB60M dùng cho hàng rào khoảng cách từ 1m- 60m
WHY USE A SOLAR-POWERED WIRELESS ELECTRONIC PERIMETER ALARM?
Most homes, from rural areas to cities, have fences built around them for protection. Some have pointed iron spikes or pieces of broken glass along the top of the wall. Barbed wire is also common, especially around warehouses and factories. Many consider these methods effective. However, they affect the appearance of the property and may be dangerous if a household member accidentally touches them.

This solution from Kawasanhelps users protect their homes while preserving their appearance. The SB60-100M solar-powered wireless beam detector can be mounted along the top of a wall, between fence posts and at other important points around the property. The electronic perimeter alarm works by projecting infrared beams that are invisible to the naked eye. When a person enters or obstructs the detection area, the sensor sends an alarm signal; it is designed to reduce false alarms caused by animals, birds or cats. This gives homeowners peace of mind when they are away or when the property is too large to monitor easily.

ADVANTAGES OF SOLAR-POWERED WIRELESS BEAM DETECTORS
- Protection against wire cutting: With no power or signal cable between the two beam units, an intruder cannot cut those connecting wires to disable the alarm before entering. The wireless design also avoids disruption to the intruder alarm system caused by cut electrical wires.
- Saves the cost of wiring materials and installation labor. Wiring and labor for a conventional beam alarm can be expensive—potentially more than the cost of investing in an SB60M/SB100M solar-powered wireless beam set.

- Solar energy does not add to the electricity bill and does not require frequent maintenance.
- Uses RF 433MHz to connect wirelessly to an alarm siren or control unit.
- The dual infrared beams have a transmitter-to-receiver distance of 0–60m or 60–100m. Four SB beam sets can cover the entire protected perimeter.
- The integrated lithium battery can provide power for 15–20 days, maintaining operation during several cloudy or rainy days.
- The perimeter detector has an IP65 rating for resistance to dust, rain and mist.
APPLICATIONS OF SOLAR-POWERED WIRELESS BEAM DETECTORS
The infrared perimeter alarm can be installed along fences and at gates. It can connect to an on-site siren or an alarm control unit. Suitable locations include:
- Homes, villas, resorts, temples, hospitals and similar areas.
- Warehouses, factories, companies, stadiums and similar areas.

IS KAWASAN’S PERIMETER ALARM A GOOD CHOICE?
- Kawasan has 16 years of experience in security devices. Consumers have trusted the brand for many years.
- The product has a 2-year official warranty and a service life of >5 years, helping users save on replacement costs.
- When the highly sensitive dual infrared beams detect an intruder, the device can sound an alarm or send a signal to the alarm control unit. This helps protect people and property when the homeowner is away or when children and other family members are at home.
- The SB60-100M perimeter alarm helps reduce costs. Its solar-powered battery can operate for 5–7 rainy days, helping it continue protecting the installed area.
- Instructions are provided in Vietnamese for the convenience of Vietnamese users.

2 reviews for Đầu BEAM Không Dây Năng Lượng Mặt Trời SB60M
-
5 out of 5
Hữu Phước –
Dùng năng lượng mặt trời khá tiện, thiết kế không dây giúp lắp đặt linh hoạt
-
5 out of 5
Hoàng Minh –
mình lắp ở khu vực hàng rào ngoài sân, không cần kéo dây điện nên bố trí khá gọn. Dùng năng lượng mặt trời nên phần nguồn cũng đỡ phải can thiệp nhiều









Hữu Phước –
Dùng năng lượng mặt trời khá tiện, thiết kế không dây giúp lắp đặt linh hoạt
Hoàng Minh –
mình lắp ở khu vực hàng rào ngoài sân, không cần kéo dây điện nên bố trí khá gọn. Dùng năng lượng mặt trời nên phần nguồn cũng đỡ phải can thiệp nhiều