Description

BTV01 AUTOMATIC IRRIGATION TIMER VALVE

The automatic irrigation timer valve, also known as an electronic water timer valve, allows you to quickly install an automatic irrigation system without worrying about electrical wiring or complicated connections. The irrigation automatic timers tưới cây dùng 2 viên Pin 3A – 1.5V. Cho phép bạn lắp đặt một hệ thống tưới tự động, nhanh chóng, đơn giản và an toàn nhất. Thao tác đơn giản mà bất cứ ai cũng có thể làm được.

Van có 16 chu kỳ cài và hẹn giờ tối thiểu 1 phút. Tiêu chuẩn IP44 chống nước và bụi bẩn tốt. Đường kính ống nước vào: 27-21 mm; ống ra: 16 mm. Bộ phụ kiện đi kèm gồm: 10m ống phi 16; 5m ống phi 6; 10 béc tưới; khớp nối; khởi thuỷ…

IMPORTANT NOTES WHEN USING THE IRRIGATION TIMER VALVE

• BTV01 Timer Valve Use high-quality batteries to prevent battery leakage during long-term outdoor operation.
• Replace Batteries Regularly: Replace the batteries every 6–12 months, depending on the number of ON/OFF cycles of each system, to ensure your irrigation system continues operating efficiently. When replacing the batteries, do it quickly because the programmed settings will reset if the batteries are removed for 30 seconds. If the settings are lost, you will need to reprogram the device.
• Complete the Settings Before Installation: It is recommended to set up the program and securely close the waterproof cover before installation to prevent water or dirt from entering and damaging the electronic circuit.
• Water Temperature: The water temperature should not exceed 40°C to prevent damage to the water pipes.
• Installation Position: Install the valve vertically to make it easier to monitor its operating status.