RS686C MICROWAVE SENSOR LAMP HOLDER TODAY'S BEST SELLING

• RS686C touch lamp holder uses 5.8 GHz Radar microwave induction technology. The sensor is based on the principle of detecting waves of the human body and objects with moving wave frequencies. Very high sensitivity, capable of detecting even the smallest movements. Good ability to penetrate obstacles such as wood, glass, thin walls... Not affected by ambient temperatures above 32°C.
• Sensor lamp socket Integrates the function of adjusting LUX (light/dark), detecting the brightness of the environment. The sensor can be adjusted to only turn on the light when the environment starts to get dark. If the space is bright enough, the microwave sensor will no longer work.
• The Time button adjusts the delay time (auto-off time), this delay time can be adjusted from 30 seconds to 10 minutes. If someone moves continuously in the scanning area, the light will remain on continuously.
• The Sens button adjusts the sensing distance to detect movement. Adjustable distance from 2-8 meters.

HIGHLIGHTS OF MICROWAVE SENSOR LIGHT HOLDINGS COMPARED TO INFRARED SENSING LIGHT HOLDINGS

• Overcome the disadvantages of infrared sensor lamp holders such as: narrow scanning angle, affected by temperature, cannot penetrate obstacles...
• The microwave sensor lamp holder has good ability to penetrate obstacles such as glass, wood, thin walls... Can detect movement from afar and automatically turn on the light for the user.
• The RS686C smart lamp holder is not affected by ambient temperatures above 32°C. Avoid turning lights on and off randomly.
• E27 standard swirl lamp holder design is easy to replace and install into conventional lamps.
• Parameters and instructions are recorded in Vietnamese, making it easy for users to use.
• Kawasan RS686C touch lamp holder is researched and manufactured in Vietnam. Should be more suitable for Vietnamese people's usage habits.

THE DIFFERENCE OF KAWASAN SENSOR LIGHT HOLDER WITH OTHER PRODUCTS ON THE MARKET

• Most lamp holders on the market are infrared sensors, so the scanning angle is narrow and the sensitivity is lower. Especially when the weather is hot > 320C, the sensor works very poorly.
• Other touch lamp holders are cheaper and have flimsy adjustment buttons. When adjusting, it often slips and cannot be adjusted because there is no limit mark. This makes it impossible for users to control the maximum level.
• Products on the market often cannot adjust the touch distance. Lights often turn on randomly, causing discomfort and reducing the life of sensors and bulbs.
• Lamp holders usually have a durability of about 1 year and a warranty of 3 months to 1 year. Although the price is cheap, in return for the replacement cost within 5 years (the durability of the Kawasan touch lamp holder), the actual cost is much higher.

APPLICATION OF RS686C MOTION SENSOR LIGHT HOLDER

• Used to turn lights on and off for bathrooms, waiting rooms, hallways, stairs, emergency exits, garages, etc.
• Installed for long distance stairs. Installed in the stair light position, when moving from top down or from bottom up, the sensor will also receive the wave and turn on the light promptly.
• Solutions for office buildings or factories such as: Hallway lights, walkways, emergency exits, changing rooms, security duty rooms

BENEFITS OF SMART LIGHT HOLDER RS686C

• Save energy and time because you avoid forgetting to turn off the power every time you leave. Especially families with children and the elderly.
• Safe for users' health because they do not have to frequently touch the switch to turn on the light. Especially the switch in the toilet because it can be a source of germs that spread disease.
• Safe for children and the elderly who have to fumble for the switch to turn on the light when going to the bathroom. Avoid the risk of electric shock due to electric leakage
• Has anti-theft ability because when someone breaks in, the light will turn on and the thief will not dare to enter.

• Operating voltage: 180-220VAC/50-60Hz
• Scanning angle: 145° – 180°
• Induction distance: 2-8 m (corresponding to scanning radius of 1-5m)
• Auto-off adjustment time: 30 seconds to 7 minutes
• Active sensor adjustable brightness: from 10 LUX (dark) to 2000 LUX (light)
• Power consumption: <0.2W
• Output power of E27 screw lamp: 60W (Led)
• Operating temperature: -10+70°C
• Installation height: 2-4m
• Watertight level: (IP20 for indoor installation, dust and steam resistant)

FUNCTION OF ADJUSTABLE BUTTONS

• LUX button: Adjust the light or dark environment detection mode to activate the sensor mode to turn on the light.
• TIME button: Adjust auto-off time. The auto-off time can be adjusted from 10 seconds to 5 minutes. This delay time will be started again in the new induction cycle.
• SENS button: Adjust the motion detection sensing distance. Adjustable within a range of 2-8 meters.

HOW TO INSTALL KAWASAN SENSOR LIGHT HOLDER

• Step 1: Find a suitable location to make sure you don't face the door where many people pass by. Do not project onto roads or places with trees, drafts, moving animals, etc.
• Step 2: Drill the wall to fix the lamp holder and screw the bulb in.
• Step 3: Check if the lamp holder has power and is working (pay attention to turn the Time button to the smallest position, the LUX button to the sun - largest position). Move back and forth to see if the sensor turns itself on and off after 10-20 seconds!
• Step 4: Adjust function buttons to suit each user's position of use

COMMON PROBLEMS AFTER INSTALLATION

• The light installed on the sensor turns on continuously, does not turn off: Check to see if the delay time adjustment button has been reduced to the minimum level for testing? After running the test for the minimum time, adjust it to about 30% adjustment range (about 3 minutes), then try again.
• The light still does not turn off after monitoring for 3-5 minutes: Check the location of the back wall of the sensor and if there are people moving around.
• Poor sensitivity, going close to the new location: Check the LUX button to see if it has increased the minimum level to 50%? If the area is always lacking light and you want the sensor to always turn on when someone enters, you should set it to the "sun & moon" position.
• When adjusting to the moon, it's dark but the sensor still doesn't turn on: Adjust the LUX level to increase, turn more toward the sun to avoid other lights shining in, making the environment not completely dark. Touch cannot be turned on.

Thank you for trusting Kawasan products!

Toll-Free Consulting Hotline: 1800 0058 Or Call Directly: 0911 757 234

Website: www.kawasan.com.vn